Motorola MG7310 User Manual page 33

To configure and enable a Guest Network:
1 Select the desired Guest Network (there are seven available).
2 Click the Save button.
3 Select Enabled and click Save to enable the selected Guest
The following steps are optional. Follow them if you want to change the
default Guest Network Name and Password:
1 Select and delete the old Guest Network Name, then type in the
2 You can click the Show Key box to check your typing for
3 Select and delete the old Password, then type in the new
4 Click the Save button.
Network.
new Guest Network Name and click Save.
Password.
Password.