Table of Contents
Advertisement
Problem assistance table
Problem
The device can receive no, or
only a weak GPS signal.
The device does not recognise
my memory card.
42
Cause
After switching on, the device
needs about 1 minute before it
is ready to navigate. With initial
switiching on, the device needs
a bit more time and a strong
GPS signal.
In buildings the GPS signal is
usually limited.
Strongly metalised windscreens
can disturb the GPS reception.
Refl ections and
compartmentalisation due
to e.g. multistorey (or tall)
buildings, tunnels, mountains
or sheet metal work
Heavy snow or extreme weather
Transport of the vehicle by train
or ferry.
The memory card is not
compatible with this device.
The memory card was
formatted with a wrong fi le
system.
Due to technical advancements Blaupunkt cannot guarantee the
perfect functioning of memory cards of different manufacturers
and types. Try a memory card of another manufacturer or with
another capacity.
Measure
Go into the open and raise the
device up a bit. Your device
will be operational at the latest
after 2 to 5 minutes. After
that your device will be able
to navigate under less ideal
conditions.
Try to locate the device
somewhere else in the vehicle.
Connect an external GPS
antenna.
The device must have a clear
view of the sky. Wait until
the GPS reception becomes
available again. The navigation
will then automatically
proceed.
Use a compatible memory card.
(see chapter "Technical data")
Format the memory card in the
fi le system FAT16 or FAT32.
Advertisement
Table of Contents
