Table of Contents
Advertisement
–
Insert Via: Adding a location on a route
as a stopover
–
Continue: Adding a location as a
stopover on the current route. Further
places can be entered in the map as
stopovers or a destination.
–
Remove : If you mark a destination, the
button is displayed. The destination is
removed.
u
Tap on the button Set as Destination to start
the navigation.
Points of interest (POI)
Points of interest (or POI's) are specifi c locations
such as parking and petrol stations wihch are
stored in the digital map.
u
Select in the menu Find Menu on
the symbol.
The menu Where to search? is
displayed.
Select the POI in a specifi ed location
u
Tap on the menu Where to search?
on the symbol.
The Find POI By Address menu is
displayed.
u
Enter an address (see chapter "Entering an
address")
u
Select the POI category.
u
Select the POI.
u
Tap on the button Set as Destination to start
the navigation.
Select a POI in the local area, in the area of the
destination, or on the route
u
Tap on the menu Where to search?
on the symbol in order to search for a
POI near to your current position.
-or-
u
Tap on the menu Where to search?
on the symbol in order to search for a
POI near to your destination.
Note:
The destination area which you last started
navigating to is selected as the destination.
-or-
u
Tap on the menu Where to search?
on the symbol in order to search for a
POI along the currently selected
route.
u
Select the POI category.
u
Select the POI.
u
Tap on the button Set as Destination to start
the navigation.
Selecting POIs on the map
u
Tap on the menu Where to search?
on the symbol.
The map is displayed.
u
Shift and scale the map, as described in the
chapter "Working with the map".
u
Select the location of your choice.
The place is marked and its name indicated in
the lower display bar.
u
Tap on the button OK.
u
Select the POI category.
u
Select the POI.
u
Tap on the button Set as Destination to start
the navigation.
Navigation
17
Advertisement
Table of Contents
