Download Print this page

Whirlpool W10597594C User Instructions page 19

Hide thumbs

Advertisement

Reverse osmosis water filtration system connected to
your cold water supply? This can decrease water pressure.
See "Water Supply Requirements."
Water is leaking from the dispenser system
NOTE: One or two drops of water after dispensing is normal.
Glass not being held under the dispenser long enough?
Hold the glass under the dispenser 2 to 3 seconds after
releasing the dispenser lever.
New installation? Flush the water system. See "Water
Dispenser."
Recently changed water filter? Flush the water system.
See "Water Dispenser."
Water on the floor near the base grille? Make sure the
water dispenser tube connections are fully tightened.
See "Refrigerator Door(s) and Drawer."
Water from the dispenser is warm
NOTE: Water from the dispenser is only chilled to 50°F (10°C).
New installation? Allow 24 hours after installation for the
water supply to cool completely.
Recently dispensed large amount of water? Allow 24 hours
for water supply to cool completely.
Water not been recently dispensed? The first glass of
water may not be cool. Discard the first glass of water.
Refrigerator connected to a cold water pipe? Make
sure the refrigerator is connected to a cold water pipe.
See "Water Supply Requirements."
19
19
19
19
19
19

Advertisement

loading