Contest irLED56 User Manual page 7

irLEDs series - LED PAR projectors with infrared remote control
5 - The internal menu
Press the MODE button to acces the internal menu.
To switch from a submenu to another, press the MODE button again.
Simultaneously press MODE and DOWN if you want the display to shut off when the menu remains inactive.
5.1 - C.XX Menu: Choosing a fixed colour or sequence
Press MODE until reaching C.XX. Press UP or DOWN to pick a colour. C.00 means the projector is in Black-out
mode. Fixed colours and sequences are described below:
C.00 Black-out
C.01 Red
C.02 Orange
Yellow
C.03
C.04 Green
C.05 Cyan
C.06 Blue
C.07 Pink
C.08 Magenta
C.09 Cool white
C.10 Warm white
Colours sequencing (without crossfade)
C.11
C.12 Blue to Green crossfade sequence
C.13 Red to Orange crossfade sequence
C.14 Crossfade sequence with every colour
C.15 Warm white to cool white crossfade sequence
5.2 - J.XX Menu: Adjust the colour sequence speed (without crossfade):
Press MODE until reaching J.XX. Press UP or DOWN to pick a value between 1 and 99. 1 is the slowest speed, 99
the fastest.
5.3 - F.XX Menu: Adjust the colour sequence speed (with crossfade)
Press MODE until reaching F.XX. Press UP or DOWN to pick a value between 1 and 99. 1 is the slowest speed, 99
the fastest..
5.4 - A.-- Menu: Switching to Auto mode
Press MODE until reaching A.- - . The projector will alternate between crossfade and step sequences.
The sequencing speed described above will automatically be used.
English
Page 7