Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ID Lock Manuals
  4. Door locks
  5. 101 series
  6. Operational manual

ID Lock 101 series Operational Manual

With z-wave module 01a
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
Operational Manual for
Monter in gsveivi ser
ID Lock 101 with
101-serien
Z-Wave Module 01A

Advertisement

loading
Need help?

Need help?

Do you have a question about the 101 series and is the answer not in the manual?

Questions and answers

Related Manuals for ID Lock 101 series

Summary of Contents for ID Lock 101 series

  • Page 1 Operational Manual for Monter in gsveivi ser ID Lock 101 with 101-serien Z-Wave Module 01A...

  • Page 2: Getting Started

    Inclusion – (Puts your device in inclusion mode) Push and hold button until all LEDs on keypad • activates. (with ID Lock in an unlocked state) Release button and press “8” on keypad. • Inclusion mode starts immediately. LED indicator below logo signals this by flashing blue.

  • Page 3: Supported Command Classes

    SUPPORTED COMMAND CLASSES Non Secure mode COMMAND_CLASS_ZWAVEPLUS_INFO_V2 COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 COMMAND_CLASS_SECURITY_V1 COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1 COMMAND_CLASS_BATTERY_V1 COMMAND_CLASS_POWERLEVEL_V1 COMMAND_CLASS_CONFIGURATION_V1 Secure Mode COMMAND_CLASS_VERSION_V2 COMMAND_CLASS_DOOR_LOCK_V2 COMMAND_CLASS_USER_CODE_V1 COMMAND_CLASS_ASSOCIATION_V2 COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 COMMAND_CLASS_NOTIFICATION_V4 COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2 CONFIGURATON PARAMETER These configuration parameter number and values are specific for application. COMMAND_CLASS_CONFIGURATION Parameter Name Size Description Number Configuration Door Lock Mode Set parameter...
  • Page 4 RFID Registration Configuration: ID Lock can use up to 50 RFID cards. In order to use a RFID, RFID has to be registered by Z- Wave configuration command class. Configuration Set in case of starting to register from backend side ( Ex. App)

  • Page 5: Notification Parameters

    Infomation NOTIFICATION PARAMETERS These Notification parameters ( types and levels) are specific for application. ID Lock supports the Notification Class(V4) to report events of ID Lock. The type and event are specific for IDLock and defines are as below. COMMAND_CLASS_NOTIFICATION(V4):...
  • Page 6 (0x06) Code Report PIN) User ID =2 ( Service PIN) User ID =0 ( Remote Unlock) Unlock By RF with invalid user Unknown Unknown PIN Code code (0x14) Credential Infomation Unknown RFID Home Security(0x07) Tampering, Door Forced Open Product covering Removed (0x03) Emergency (0x0A) Contact Fire Service (0x2)
  • Page 7 Notification Notification Para Para1 Type Event Length 0x06 0x06 0x01 0x01 The vaule of para1 means User ID of Service PIN ( User ID = 2 ) Notification Notification Para Para1 Type Event Length 0x06 0x06 0x01 0x02 If the door is unlocked by remote side from mobile Application, in order to know the status, the value of para1 means remote User ID ( application specific value = 0 ) Notification Notification...
  • Page 8 Manufacture ID 0x0230 Product Type ID 0x03 PRODUCT_TYPE_ID_ZWAVE_PLUS Product ID 0x01 PRODUCT_ID_DoorLockKeyPad ID Lock supports the Door Lock Command Class Version 2 by the following parameters. COMMAND_CLASS_VERSION_V2 Name Value Z-Wave Protocol Library Type 0x03 Z-Wave Protocol Version 0x04 Z-Wave Protocol Sub version...
  • Page 9 ○ Grouping identifier : 1 ○ Name : Lifeline User Code Parameter ID Lock have 2 pin codes(Master PIN and Service PIN ) that are 4 -10 digit in lengh. ○ Master PIN : User Identifier 1 ○ Service PIN: User Identifier 2...