Table of Contents
Advertisement
Mersey Super - Installation & Service Instructions
Page 22 of 35
Fig. 25
Page 13
REPLACEMENT OF PARTS - Page 14
Fig. 26
e. Remove 2 screws above the chassis base securing the governor to the automatic valve.
f. Remove 3 screws above the chassis base securing the governor to the chassis base.
g. Carefully withdraw the governor complete with pressure relief valve, TAKE CARE NOT
TO BEND THE PUSH ROD. IF THE ROD IS BENT, A NEW ONE MUST BE FITTED.
h. Remove the push rod.
i. Remove 6 screws and separate the two halves of the water governor.
file://P:\System\DATA\Dx\DS1\installation\2551\I24-2551\I24-2551.htm
09/12/2009
Advertisement
Table of Contents
