Dell Precision R5400 Service Manual page 7

Back to Contents Page
Mid-Support Brace
Dell Precision™ R5400 Service Manual
Removing the Mid-Support Brace
Replacing the Mid-Support Brace
CAUTION: Only trained service technicians are authorized to remove the computer cover and access any of the components inside the computer.
Before working inside the computer, read the safety information that shipped with the computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the Mid-Support Brace
1. Perform the steps in Before Working on Your
2. Press inward on the blue release latches at each end of the brace, and lift the brace from the computer.
1 guiding pins (6, 3 on each side of chassis)
release latches (2)
5 notch (2, one at each end of brace)
Replacing the Mid-Support Brace
1. Align the brace so that the vertical members slide down between the guiding pins.
2. Slide the brace down until it snaps into place.
Back to Contents Page
Computer.
2 vertical members (2)
4 mid-support brace