Download  Print this page

Water Quality - Bosch OptiFlow Professional GWH12 1 CTD E23 Operating Manual

Gas continuous flow water heater
Hide thumbs

Advertisement

7

Water quality

All Bosch water heating appliances are constructed from high
quality materials and components and all are certified for
compliance with relevant parts of Australian and New Zealand
gas, electrical and water standards.
Whilst Bosch water heaters are warranted against defects, the
warranty is conditional upon correct installation and use, in
accordance with detailed instructions provided with the
heater. In the case of the water supplied to the heater, it is
important that the water quality be of an acceptable standard.
The water quality limits/parameters listed in water quality table
are considered acceptable and generally, Australian and New
Zealand suburban water supplies fall within these limits/
parameters.
In areas of Australia and New Zealand where water may be
supplied, either fully or partly, from bores, artesian wells or
similar, one or more of the important limits may well be
exceeded and the heater could, therefore, be at risk of failure.
Where uncertainty exists concerning water quality, intending
appliance users should seek a water analysis from the water
supplying authority and in cases where it is established that the
water supply does not meet the quality requirements of the
water quality table, the Bosch warranty would not apply.
Water quality table
Maximum levels
6.5-9.0
+0.4 to -1.0
at 65 °C
Table 5
OptiFlow Professional
200
250
180
mg/l
mg/l
mg/l
mg/l
1
Water quality | 13
6 720 813 938 (2016/06)

Hide quick links:

Advertisement

loading

  Related Manuals for Bosch OptiFlow Professional GWH12 1 CTD E23