Husqvarna 233RJ Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Trimmer
  5. 233RJ
  6. Operator's manual

Husqvarna 233RJ Operator's Manual

Hide thumbs Also See for 233RJ:
Table of Contents

Advertisement

Quick Links

See also: Operator's Manual
H1151070-26,241R,GB.fm Page 1 Monday, August 26, 2013 10:48 AM
Operator ' s manual
233RJ
Please read the operator's manual carefully and make sure you understand the instructions
before using the machine.
E E E E n n n n g g g g l l l l i i i i s s s s h h h h

Advertisement

Table of Contents
loading

Related Manuals for Husqvarna 233RJ

Summary of Contents for Husqvarna 233RJ

  • Page 1 H1151070-26,241R,GB.fm Page 1 Monday, August 26, 2013 10:48 AM Operator ′ s manual 233RJ Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. E E E E n n n n g g g g l l l l i i i i s s s s h h h h...

  • Page 2: Key To Symbols

    H1153396-26,233RJ,GB.fm Page 2 Monday, March 22, 2010 4:31 PM KEY T O SYMBOLS Symbols W ARNING! A clearing saw, Wear sturdy, non-slip boots. brushcutter or trimmer can be dangerous if used incorrectly or carelessly, and can cause serious or fatal injury to the operator or others.

  • Page 3: Table Of Contents

    H1153396-26,233RJ,GB.fm Page 3 Monday, March 22, 2010 4:31 PM CONTENTS Contents Note the f ollowing before starting: KEY TO SYMBOLS Symbols ..............2 Please read the oper ator’s manual carefully. CONTENTS Contents ............... 3 W ARNING! Long-term exposure to noise can result in permanent hearing Note the following before starting: ......

  • Page 4: Intr Oduction

    The business concept is to develop, manufacture and market motor driven products for forestry and gardening as well as for building and construction industry. Husqvarna ′ s aim is also to be in the front edge according to ergonomics, usability, security and environmental protection.

  • Page 5: Wha T Is What

    H1153396-26,233RJ,GB.fm Page 5 Monday, March 22, 2010 4:31 PM WHA T IS WHA T? What is what on the brush cutter? Blade 16 Trimmer head Bevel gear 17 Drive disc Grease filler cap, bevel gear 18 Support cup Cutting attachment guard 19 Support flange...

  • Page 6: General Safety Preca Utions

    H1153396-26,233RJ,GB.fm Page 6 Monday, March 22, 2010 4:31 PM GENERAL SAFETY PRECA UTIONS Impor tant Personal protective equipment IMPORTANT! IMPOR TANT! The machine is only designed for trimming grass. A clearing saw, brushcutter or trimmer can be dangerous if used incorrectly or carelessly, and can The only accessories you can operate with this engine cause serious or fatal injury to the operator or others.

  • Page 7: Machine ' S Safety Equipment

    H1153396-26,233RJ,GB.fm Page 7 Monday, March 22, 2010 4:31 PM GENERAL SAFETY PRECA UTIONS BOO TS original positions. This movement is controlled by two independent return springs. This arrangement means that Wear boots with steel toe-caps and non-slip sole. the throttle control is automatically locked at the idle setting.
  • Page 8 H1153396-26,233RJ,GB.fm Page 8 Monday, March 22, 2010 4:31 PM GENERAL SAFETY PRECA UTIONS Stop s witch Vibration damping system Use the stop s witch to switch off the engine. Y our machine is equipped with a vibration damping system that is designed to minimize vibration and make operation easier.
  • Page 9 H1153396-26,233RJ,GB.fm Page 9 Monday, March 22, 2010 4:31 PM GENERAL SAFETY PRECA UTIONS Muffl er Regularly check that the muffler is securely attached to the machine. The m uffler is designed to keep noise levels to a minimum and to direct exhaust fumes away from the user. A muffler fitted with a catalytic converter is also designed to reduce...

  • Page 10: Cutting Equipment

    H1153396-26,233RJ,GB.fm Page 10 Monday, March 22, 2010 4:31 PM GENERAL SAFETY PRECAUTIONS attachment rotates. (CAUTION! The nut has a left-hand A trimmer head is intended for trimming grass. thread.) Tighten the nut using the socket spanner. General rules Only use cutting attachments with the guards we The nylon lining inside the locking nut must not be so worn recommend! See the chapter on Technical data.

  • Page 11: Trimmer Head

    H1153396-26,233RJ,GB.fm Page 11 Monday, March 22, 2010 4:31 PM GENERAL SAFETY PRECAUTIONS • Sharpen all edges equally to maintain the balance of the blade. WARNING! Always discard a blade that is bent, twisted, cracked, broken or damaged in any other way. Never attempt to straighten a twisted blade so that it can be reused.

  • Page 12: Assembly

    H1153396-26,233RJ,GB.fm Page 12 Monday, March 22, 2010 4:31 PM ASSEMBLY Fitting the J-handle Fitting blades and trimmer heads WARNING! When fitting the cutting attachment it is extremely important that the raised • Position the handle on the shaft. Note that the handle section on the drive disc/support flange...

  • Page 13: Fitting The Transport Guard

    H1153396-26,233RJ,GB.fm Page 13 Monday, March 22, 2010 4:31 PM ASSEMBLY • Fit the nut (G). The nut must be tightened to a torque • Screw on the trimmer head/plastic blades (H) in the of 35-50 Nm (3.5-5 kpm). Use the socket spanner in opposite direction to the direction of rotation.

  • Page 14: Fuel Handling

    H1153396-26,233RJ,GB.fm Page 14 Monday, March 22, 2010 4:31 PM FUEL HANDLING Fuel safety Petrol Never start the machine: If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate. CAUTION! Always use a quality petrol/oil mixture at least If you have spilt fuel on yourself or your clothes, 90 octane (RON).

  • Page 15: Fuelling

    H1153396-26,233RJ,GB.fm Page 15 Monday, March 22, 2010 4:31 PM FUEL HANDLING Mixing Fuelling • Always mix the petrol and oil in a clean container intended for fuel. • Always start by filling half the amount of the petrol to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture.

  • Page 16: Starting And Stopping

    H1153396-26,233RJ,GB.fm Page 16 Monday, March 22, 2010 4:31 PM STARTING AND STOPPING Check before starting trimmer guard if they have been exposed to impact or are cracked. • Never use the machine without a guard nor with a defective guard.
  • Page 17 H1153396-26,233RJ,GB.fm Page 17 Monday, March 22, 2010 4:31 PM STARTING AND STOPPING Primer bulb: Press the air purge repeatedly until fuel CAUTION! Do not pull the starter cord all the way out and begins to fill the bulb. The bulb need not be completely do not let go of the starter handle when the cord is fully filled.

  • Page 18: Working Techniques

    H1153396-26,233RJ,GB.fm Page 18 Monday, March 22, 2010 4:31 PM WORKING TECHNIQUES General working instructions Always hold the machine with both hands. Hold the machine on the right side of your body. IMPORTANT! This section describes the basic safety precautions for working with brush cutters and trimmers.
  • Page 19 H1153396-26,233RJ,GB.fm Page 19 Monday, March 22, 2010 4:31 PM WORKING TECHNIQUES Basic working techniques • Let the support cup rest lightly against the ground. It is used to protect the blade from hitting the ground. Always slow the engine to idle speed after each working •...
  • Page 20 H1153396-26,233RJ,GB.fm Page 20 Monday, March 22, 2010 4:31 PM WORKING TECHNIQUES Cutting • The trimmer is ideal for cutting grass that is difficult to reach using a normal lawn mower. Keep the cord parallel to the ground when cutting. Avoid pressing the trimmer head against the ground as this can ruin the lawn and damage the tool.

  • Page 21: Maintenance

    H1153396-26,233RJ,GB.fm Page 21 Monday, March 22, 2010 4:31 PM MAINTENANCE Carburettor clean the mesh at least once a week. This is best done with a wire brush. Adjusting the idle speed (T) Check that the air filter is clean. When the idle speed is correct, the cutting attachment should not rotate.

  • Page 22: Fuel Filter

    H1153396-26,233RJ,GB.fm Page 22 Monday, March 22, 2010 4:31 PM MAINTENANCE • Excessive fuel consumption. The grease in the bevel gear does not normally need to be changed except if repairs are carried out. Spark plug Clean the filter every 25 hours, or more regularly if The spark plug condition is influenced by:...

  • Page 23: Maintenance Schedule

    H1153396-26,233RJ,GB.fm Page 23 Monday, March 22, 2010 4:31 PM MAINTENANCE Maintenance schedule The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carry out the maintenance and service work described in this Operator’s Manual.

  • Page 24: Technical Data

    H1153396-26,233RJ,GB.fm Page 24 Monday, March 22, 2010 4:31 PM TECHNICAL DATA Technical data 233RJ Engine Cylinder displacement, cm 29,5 Cylinder bore, mm 38,0 Stroke, mm Idle speed, rpm 3000 Recommended max. speed, rpm Speed of output shaft, rpm Max. engine output, acc. to ISO 8893, kW/ rpm 1,0/8000 Catalytic converter muffler...

  • Page 25: Ec-Declaration Of Conformity

    We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the brush cutters Husqvarna 233RJ with serial numbers dating from 2009 onwards (the year is clearly stated on the rating plate, followed by the serial number), comply with the requirements of the COUNCIL’S DIRECTIVE: - of May 17, 2006 "relating to machinery"...
  • Page 26 H1153396-26,233RJ,GB.fm Page 26 Monday, March 22, 2010 4:31 PM...
  • Page 27 H1153396-26,233RJ,GB.fm Page 27 Monday, March 22, 2010 4:31 PM 8,5 m 10 cm 4" 4,2 m "Clic" 15 cm 6"...
  • Page 28 H1153396-26,233RJ,GB.fm Page 28 Monday, March 22, 2010 4:31 PM 4,25 m 4,25 m 15 cm 6" 15 cm 6"...
  • Page 29 H1153396-26,233RJ,GB.fm Page 29 Monday, March 22, 2010 4:31 PM T35, T35x 8,5 m 10 cm 4" 4,3 m "Clic" 15 cm 6"...
  • Page 30 H1153396-26,233RJ,GB.fm Page 30 Monday, March 22, 2010 4:31 PM 6,0 m 10 cm 4" 3,05 m "Clic" 15 cm 6"...
  • Page 31 H1153396-26,233RJ,GB.fm Page 31 Monday, March 22, 2010 4:31 PM...
  • Page 32 HBatteritrimmer 2,3#1D75CF8.fm Page 8 Tuesday, August 27, 2013 7:43 AM Original instructions 1153396-26 ´®z+UG^¶6/¨ ´®z+UG^¶6/¨ 2013-08-27...

Table of Contents