Cuisinart CBT500E Instructions Manual page 15

F. Stopping the function
Push the button corresponding to the function in use. The motor
will stop. The LED light will start flashing indicating that the
appliance is still in 'on' mode. To turn the blender off completely,
push the button.
0
G. Pulse Mode
The pulse function allows you to use short, powerful bursts. To
blend with the pulse function, push the
the button.
PULSE
The LED light for the Pulse function will flash. Then push and
release the or
you push the
I
mode, the or the selected setting will flash.
PULSE
H. Crushing Ice
The Cuisinart® blender has a 600W motor that allows you to
crush ice without adding liquids. To guarantee greater control,
the function operates intermittently like the
function. Put the ice cubes in the jar, replace the cover and
push the button. The LED light will come on. Now
I
push the button in short bursts until the ice is the
desired consistency.
I. Dislodging Food
Use a spatula only when the blender is off and unplugged.
Remove the food stuck to the sides of the jar and put them on
top of the blades. Never use metal utensils because these could
damage the jar or the blades. Then replace the cover and
continue blending if necessary. Never turn the blender on
when the spatula is in the jar.
14
I
button as desired. Every time
button, the LED lights for each of the
J. When finished blending
Push the
the jar from the motor base to remove it.
button then
PULSE
button and unplug the appliance. Then lift
0