Driver And Passenger Seats; Power Seat Operation - NewMar ventana 2017 Owner's Manual

A combination desk/dinette table may be an optional feature in the kitchen area, depending on the floorplan of your unit.
Not all seats are equipped properly for occupancy during transit. These seats will be labeled accordingly.

Driver and Passenger Seats

Once these steps are completed, the chairs will swivel without interference.

Power Seat Operation

The driver and passenger front seats are mounted on power pedestals that offer a wide range of adjustments. The center
"joystick" switch moves the seat horizontally and vertically. The front rocker switch tilts the front of the seat up and down.
The first rocker switch controls the tilt of the rear of the seat base. Additional switches, depending on the coach year and
model, control the recline angle of the seat back.
Depending on the coach model and year, the driver and passenger seats may also be equipped with an inflatable lumbar
support in the lower back region of the seat and a passenger footrest. The power lumbar control switch is located on the
left-hand side in front of the power base controls. Pushing the switch forward will inflate the support. Pushing the switch
backward will deflate the support.
For More Information
Refer to the product manufacturer's owner's manual and links to learn more about your coach's furniture.
© 2016 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
Depending on the floorplan of your unit, a built-in dinette
booth may be an option. The dinette provides added storage
under the seating area of the booth, along with an extra
sleeping area. The sleeping area is created by lowering the
table top and arranging the cushions. This feature is not
relevant to all coaches. On coaches with the booth dinette,
seatbelts are mounted to allow forward facing passengers to
occupy these positions during transit.
The driver and passenger seats are covered in vinyl or
leather and may feature six-way power position adjustment.
The base moves the chairs forward and backward, as well as
up, down, and reverse tilt. The seats have a three-point seat
belt, along with swivel and recline features.
When the unit is not in motion, the seats can be swiveled to
face the living room of the unit via a release lever on the
pedestal. Before turning the chairs, follow this procedure:
• First extend the slideout room.
• Tilt the steering wheel up and toward the dash.
• Reposition the seat to provide enough clearance for the
steering wheel.