Renkforce C11 Operating Instructions Manual page 57

• "Replay": A-B function
Use the A-B function if you want to repeatedly play a specific part of an audio file.
When this function is selected, "A-B" is displayed at the top. "A" is flashing. Use buttons "<"
(1) and ">" (2) to switch between "A" and "B" (the selected position flashes).
At the desired start position ("A"), press the ">" button (2). The end position ("B") flashes. At
the desired end position ("B"), press the ">" button (2) again.
The selected section (from start position "A" to end position "B") is played repeatedly.
If you press the ">" button (2) again, a microphone symbol is displayed at the top. You can
now record via the integrated microphone, e.g. to sing along with the selected section. The
audio section is played. Then, you can start a new recording. Press the ">" button (2) again
to alternately play your recording and the original audio section.
To quit this function and resume normal playback, press the "M" button (4).
• "Replay times": Setting the number of repetitions
Here, you can set the number of repetitions for the A-B function (determine how often the
audio section is played).
• "Replay gap": A-B function pause
Set the pause after which the audio section is played again.
• "Exit": Quitting the function menu
Use this function to go back to the music player.
57