System Display And Controller - Outback Power Systems Systems Product Manual

System Display and Controller

MATE
Th e MATE system display and controllers are complete management
tools for your OutBack Power system. Th rough the use of a single
MATE you can remotely manage and monitor multiple inverter/
chargers, MX60s and any future OutBack power conversion and
control products.
Th e MATE and MATE2 are packed full of features to make system
management simple. Th e easy-to-read 3.1" (8 cm) LCD is backlit for
dark operating conditions. Four soft keys allow easy context-based
navigation of menus and functions. Two hot keys give immediate
access to AC and inverter functions.
A built-in clock and calendar function enables timer based program-
ming of inverter and charger operation. Th is permits you to set the
system to work with time-of-day power rates or to limit a generator's
run time to a specifi c time period of the day or week. All of your settings run time to a specifi c time period of the day or week. All of your settings
are stored in permanent memory to eliminate the need to reprogram in are stored in permanent memory to eliminate the need to reprogram in
the event of a system shutdown or battery replacement. Th e MATE and
MATE2 include a RS232 port with DB9 jack for connection to the serial MATE2 include a RS232 port with DB9 jack for connection to the serial
port of a PC computer. Th rough the use of optional WinVerter soft ware port of a PC computer. Th rough the use of optional WinVerter soft ware
you can perform such operations as data logging and graphical display
of the system's operation and performance.
MATE2M
Th e MATE2M is the same
technology as the MATE
and MATE2 but is designed
to be used with your
M-series inverter/chargers
in mobile applications.
Incorporating a more
simplifi ed menu, the settings
needed for mobile power
system management are
more quickly accessed.
A fl ush mount case design
makes installation in boats
and RVs more compact
and attractive.
Communication with multiple
products requires optional HUB
2005
MATE Specifi cations
MATE
MATE2
MATE2M
Interface Display
Control Keypad
Status Indicators
Communication Protocol
Interconnection Cabling
PC Computer Interface
Microprocessor
Set point and Data Memory
Clock / Calendar
Environmental Rating
Maximum Cable Length
Warranty
Weight Shipping
Dimensions (H x W x L) Shipping
MATE2 and MATE2M
Surface mount with RS232
Flush mount with RS232
Flush mount without RS232
3.1" (8 cm) backlit LCD
6 backlit silicone keys - dedicated inverter and AC input keys
Two LED Status Indicators
Proprietary OutBack Multi-drop using an OutBack HUB4 or HUB10
Standard CAT 5 network cable with RJ45 modular jack - 50' (5 m) included
RS232 opto-isolated DB9 jack 9600 baud serial communication
16 MHz low power consumption version
32K non-volatile fl ash RAM
On-board real time clock with battery backup
Indoor Type 1
1000' (300 m)
Standard 2 year / Optional 5 year
1 lb (.5 kg)
5.75 x 4.25 x 2" (15 x 11 x 5 cm)
MATE
Grey
Black
Black
l
OutBack Power Systems Inc. 28
7