Amplicomms TCL 300 Operating Instructions Manual page 21

function on.
Note: When set to ALL, AUDIO and SHAKER the
indicator "Alarm set" is illuminated. It flashes, when
the alarm goes off.
Setting the vibration mode
1. Select the mode with the VIBRATION switch:
- PULSE: with interruption
- CONTINUE: continuous.
Setting the snooze mode
1. Select the mode with the SNOOZE switch:
- OFF: snooze function off
- ON: After pressing the ALARM STOP button the
alarm will be repeated after approx. 9 minutes
(total time of activation is approx. 2 hours).
Setting the volume
1. Adjust the alarm volume with VOL.
(See chapter "Helpline" for costs and hours of operation)
S
Helpline UK 0844 800 6503
/ O
ETTING
A
PERATION NHANG
17