Brother PT-2470 User Manual page 6

Tape Cutter
Follow these guidelines to avoid personal injury and damage of the P-touch.
Do not open the tape compartment cover
when operating the cutter unit.
AC adapter
If you do not intend using the P-touch for an
extended period of time, please disconnect
the AC adapter from the power outlet and
the P-touch to avoid battery leakage or loss
of charge.
Batteries
Follow these guidelines to avoid liquid leakage, heat or rupture of the batteries.
Do not use old and new batteries together.
Do not mix alkaline batteries with other type
batteries.
Do not let the batteries get wet.
P-touch
Follow these guidelines to avoid personal injury and damage of the P-touch.
Place the P-touch on a flat, stable surface
such as a desk.
Do not leave the P-touch within reach of
children with the back cover open.
Tape
Depending on the location, material, and environmental conditions, the label may unpeel or
become irremovable, the colour of the label may change or be transferred to other objects.
Before applying the label, check the environmental condition and the material.
Memory
Any data stored in memory will be lost due to failure or repair of the P-touch, or when the
batteries expires and the power is disconnected.
When power is disconnected for more than two minutes, all text and format settings will be
cleared. Any text files stored in the memory will also be cleared.
iv
CAUTION
Do not apply excessive pressure to the cutter
unit.
Always hold the plug when disconnecting
the power cord from the power outlet.
Check that the batteries are correctly
inserted.
If you do not intend using the P-touch for an
extended period of time, please remove the
battery to avoid battery leakage or loss of
charge.
Do not place any heavy objects on top of the
P-touch. Do not press on the LCD screen.