Brother PT-2470 User Manual page 58

Error Message
IMAGE CHARACTER
SIZE ERROR!
INPUT ABCD AT
BEGIN & END!
LENGTH LIMIT!
On 18 mm tape:
LINE LIMIT!
5 LINES MAXIMUM
On 12 mm tape:
LINE LIMIT!
3 LINES MAXIMUM
On 9 mm and 6 mm tape:
LINE LIMIT!
2 LINES MAXIMUM
MEMORY FULL!
NO FILES!
SET 24mm!
48
Cause
• This message appears if a
wide user-defined character
image is entered when the
Vertical Label Type mode
is selected.
• This message appears if a
letter between A and D has not
been entered at the beginning
and end of the bar code data
when the CODABAR
protocol is selected.
• This message appears if you
try to print or use the
Preview function when the
length of the text is greater
than the 1 m limit.
• This message appears if you
try to print or use the
Preview function when the
number of lines in the text is
greater than the maximum
possible for the installed
tape.
• This message appears if you
try to store a text file after
approximately 2000
characters have already been
stored in the memory.
• This message appears if no
files are stored in the
memory when you try to
recall or delete one.
• This message appears if a
24-mm-wide tape cassette is
not installed when printing
an Auto Format template
created for 24-mm-wide
tape.
Solution
• Change the Label Type
mode or use a tall user-
defined character image.
• Enter a letter between A and
D at the beginning and end
of the bar code data.
• Delete some of the text.
• Reduce the number of lines
or install a wider tape.
• Delete an unwanted file to
make space for the new one.
• Store a text file before trying
to recall or delete one.
• Install a 24-mm-wide tape
cassette.