Replacing Hn3000/Hn4000 Ribbon Cartridge - uPunch HN3000 Product Manual

8.0 REPLACING HN3000/
HN4000 RIBBON
CARTRIDGE
To replace the ribbon cartridge in your time clock, follow
these steps.
Open the top cover and press the button
corresponding with column 4 to move the ribbon
cartridge to center.
As shown in the figure below, pull the ribbon holders
toward you and, holding them steady in the position,
use the handle to take out the cartridge.
Insert a new cartridge between the ribbon guide and
the printer head.
Push the cartridge head until it clicks into place. Turn
the knob clockwise to fasten the ribbon.
NOTE: We strongly recommend that you use genuine
manufacturer time recorder ribbons. Using non-
genuine or non-compatible ribbons may damage
your printer and void your warranty.
50