Exploranium GR-100 User Manual page 35

GR-100 User's Manual Revision 1.2 4.0 Monitor 100U PC software
The dose data is shown for the total time since the last memory erase. The dose data can be printed in
hard copy and saved to a file in the same manner as the alarm data described above. The dose data is
saved to a file if the Save to File button in the DOSE frame is ENABLED when the Read Dose button is
activated. Make sure to type a unique file name in the file name window next to the Save to File
ENABLED button in the DOSE frame to be able to identify the file in the data directory.
Clicking on the Clear Dose button deletes the dose records from the GR-100 memory. You should be
careful not to erase the dose data until you verified that it was saved correctly under the desired file
name. The data can be downloaded from the unit and saved repeatedly until it is finally erased. If the
file name is incorrect or other errors were made, you can retrieve the data again.
A hard copy of the dose data is obtained by setting the Print button in the DOSE frame to ENABLED
state and clicking on the Read Dose button. The data is printed in a columnar format with a header as
shown above.
SAIC/Exploranium – Proprietary Page 31 Revision Date: November 2004