Setting Up The Unit; Search Mode; Setting Parameters - Exploranium GR-100 User Manual

GR-100 User's Manual Revision 1.2
To access the unit set-up screens from the MONITOR mode, do a LONG press. The sequence starts with
SEARCH. In any of the following screens a SHORT press advances to the next selection and the LONG
press activates the selected function or parameter.
• SEARCH - switches to the SEARCH mode when the unit is not in alarm.
• SETTINGS – enables activation of the audio beeper, vibrator and backlight. SHORT press toggles
between ON or OFF.
•
DATE/TIME – enables date and time setting.
•
LONG COUNT – enables measurement over an extended period of time.
• MONITOR – returns back to the monitoring mode.
3.1

Search Mode

While in the monitor (MON) display, press LONG until you see:
Release the button when the search screen is displayed. Subsequent LONG
press will select the search mode, the following screen will be shown briefly and then
the full SEARCH screen will be displayed.
3.2

Setting Parameters

A LONG press in the monitor mode followed by a SHORT press brings on the SETTINGS
screen:
Setting mode is entered with another LONG press:
The first screen that follows is used to set the beeper ON or OF:
SAIC/Exploranium – Proprietary

3.0 Setting up the Unit

Page 11
3.0 Setting up the Unit
SEARCH
SEARCH
SELECTED
SETTINGS
SETTINGS
SELECTED
SETTINGS
BEEPER ON
Revision Date: November 2004