S4 Tech Inc
Power Down
When powering down, use the menu power down first, then when indicated on the screen shut off the
power button on the back. To power down from the menu:
•
Press the MENU button on the front panel
•
Use the arrows to select the Shutdown option as shown in the figure below
•
Select EXECUTE and press the ENTER key
•
When the screen indicates it is okay to power down, then shut off the power via the Mobile
DOG Base Station main power switch.
Password Setting
Initially there is no password required to change settings on the DVR. If the system is reset to its
factory settings for some reason then the default password will be "1234". To set a password do the
following:
• Press MENU button on front panel
• Use arrows to select SYSTEM SETUP with cursor and push ENTER
• Select USER MANAGEMENT and then select PASSWORD PROTECTION
• Select ON/OFF to enable or disable password based access.
• Select ACCOUNT SETUP to configure accounts.
• Select AUTHORITY SETUP to configure access levels.
• Use ESC to move back up the menu hierarchy.
Set the Date/Time
To set the Date/Time of the unit:
• Press the MENU button on the front panel
• Use the arrows to select SYSTEM SETUP and press ENTER
• Select DATE/TIME SETUP and then press ENTER
Figure 23: Power Down Menu Screen.
17