Table of Contents
Advertisement
S4 Tech Inc
Using the External PTZ Joystick
The Mobile DOG Base Station supports an external Pelco-D Joystick option as seen in the figure
below.
Figure 16: External PTZ Joystick.
To use the external joystick in place of the DVR panel buttons for PTZ camera control, remove the
CAT-5 jumper from the joystick ports on the front panel as seen in the figure below. Next plug the RJ-
45 cable from the joystick into the Joystick PTZ port as shown. The external joystick is now ready for
use with the Mobile DOG Base Station.
Figure 17: Connecting External PTZ
Set the channel on the joystick by typing the channel number (01, 02, 03, 04) and then push the CAM
button to set it in memory. This must be done every time the system is powered up. Make sure that
channel you set matches the channel setting on the back of the connected DOG PTZ camera as seen in
the figure below.
13
Advertisement
Table of Contents
