Table of Contents
Advertisement
3. SETTINGS
3.1 Entering the setting menu
All the settings of the unit with the exception of the volume level,
can be set in the setting menu.
! Press and hold the "MODE" button and then press the
"REC." button at the same time. The display will show
"RESET
3.2 Resetting the unit
This operation will reset all the settings to the factory default
settings, and also clear all the memories at the same time.
! Enter the setting menu.
! Press "C" twice. "OK" will be displayed, and the
unit resets.
3.3 Select Language
This Caller ID unit supports 11 languages.
! Enter the setting menu.
! Press "MODE" once, the display will show the language
in use (default language is ENGLISH). To change the
language, press "REC.". To confirm the change, press
"C" or "MODE".
3.4 Setting the volume
You can adjust the volume level at any time by using the
volume switch. Three different volume levels are available
(Hi, Lo and Off).
VXXX".
Advertisement
Table of Contents
