Table of Contents
Advertisement
4.5 Call back
You can directly call back numbers that are saved in the memory,
either in the call log or in the phone directory without dialing the
number yourself.
! Make sure that the local area code and the area prefix are
correctly programmed before you use this function.
! When the number is displayed in the Call Log or in the
phone directory, press the "MODE" button for 2 seconds
until "DIALING" appears on the display, then the desired
number will then be dialed automatically.
! Pick up the handset of the connected phone when
"PICK UP HANDSET" is displayed.
4.6 Multi-Function LED
The LED indicates as the following status:-
Description
Line in use
Ringing
New calls received
Effect
Steady ON
Candence of ringing
Flashing ON / OFF
Advertisement
Table of Contents
