ASSEMBLY AND PARTS LIST
1.3 Rear Panel
1. ANT IN
Antenna feed is connected to this Input. Small loop cable is connected
from IN2 to OUT 1 (diagonally positioned)
2. ANT OUT
Used to connect an extra analogue or digital receiver.
3. RS232 Serial Port
For firmware update, serial communication port (RS-232).
4. LAN
Used to connect to the internet. (Not applicable at present.)
5. DIGITAL AUDIO (S/PDIF / Optical)
Connects to an External Audio Amplifier with S/PDIF /Optical Digital Audio.
6. USB
USB port is used for viewing external files on a memory stick, and for possible
software upgrades. (to be advised by DGTEC technician)
7. HDMI Connector
Connects
High-Definition Multimedia output
8. YPbPr
Connects component video to HD Monitors (YPbPr Type).
9. VIDEO (Yellow RCA)
Connects to a TV with video input.
10. AUDIO L/R (White / Red RCA)
Connects to a TV audio input, HD Monitors audio input or an External Audio
Amplifier.
to HD Monitors (HDMI Type).
5