Getting Started - DGTEC DG-FV500PVR User Manual

GETTING STARTED

First time installation
Note: Be sure to have the power cord connected to the mains.
After all the connections have been established, switch on your TV. If you are using
the STB for the first time or restored to factory default, a First Time Installation menu
will be displayed to guide you through the scanning of channels.
When scanning is complete, all active channels found will be stored automatically.
(In case you want to stop the scanning, press the EXIT key to exit. The channels
already found will be stored).
Now you are ready to watch digital TV channels and radio broadcasts.
In case you skip the First Time Installation screen, you can press MENU key to bring
up the main menu.
Switching programs
1. Press the NUMERIC keys (0~9) on the remote control to select the channel
number you want.
2. Alternatively press the CH
to change the available channels upward/downward.
3. Press the BACK key to view the previous channel selected.
Volume control
Press the VOL＋/－ key on the remote control to enter the volume menu
Mute
1. Press the MUTE key to temporarily mute the sound.
2. To cancel mute, press the MUTE key again.
▲ ▼
/ CH
key on the remote control or the front panel
10