Husqvarna Rider 11 Operator's Manual page 18

Cold engine:
4. Push the throttle control to position 3 (choke
position). In this position the engine receives a
richer mixture so that the engine starts more
easily.
The throttle must be moved to the side (towards
the ignition key) to reach the choke position.
Warm engine:
5. Set the throttle control midway between position
1 and 2.
6. Turn the ignition key to start position.
IMPORTANT INFORMATION
Do not run the starter motor for more than
15 seconds at a time. If the engine does
not start wait about 1 minute before trying
again.
DRIVING
1
1
2
2
STOP START
3
6007-004H
3
6007-005H
6007-006
17
English –