Trouble Shooting Schedule - Husqvarna Rider 11 Operator's Manual

TROUBLE SHOOTING SCHEDULE

Problem
Engine will not start
Starter does not pull round engine
Engine does not run smoothly
Engine seems to have no power
Engine overheats
Battery does not charge
Machine vibrates
Uneven mowing
40
– English
Procedure
• Fuel tank empty
• Plug defective
• Plug connection defective
• Dirt in carburettor or fuel pipe
• Battery flat
• Bad contact between cable and battery terminal
• Lift lever for cutting unit in wrong position
• Main fuse blown. The fuse is placed in front of the
battery, under the battery cover.
• Ignition lock faulty
• Gear shift/hydrostat pedals not in the neutral position
• Wrong gear, too high
• Carburettor incorrectly set
• Air filter clogged
• Fuel tank vent blocked
• Ignition setting defective
• Dirt in carburettor or fuel pipe
• Choke activated or throttle wire incorrectly adjusted
• Air filter clogged
• Plug defective
• Dirt in carburettor or fuel pipe
• Carburettor incorrectly set
• Choke activated or throttle wire incorrectly adjusted
• Engine overloaded
• Air intake or cooling flanges blocked
• Fan damaged
• Too little or no oil in engine
• Ignition defective
• Plug defective
• One or more cells faulty
• Bad contact between battery terminals and cables.
• Blades are loose
• Engine is loose
• Imbalance on one or more blades, resulting from
damage or inferior balancing after sharpening
• Blades blunt
• Cutting unit skew
• Long or wet grass
• Grass blockage under hood
• Different tyre pressures on right and left sides
• Over-speeding
• Drive belts slipping
• The blade has a broken break-pin (BioClip)