Harman Kardon AVR 240 Owner's Manual page 40

ADVANCED FEATURES
and the Time-Out entry will remain in effect until it is
changed, even if the unit is turned off.
If you wish to make other adjustments, press the
Buttons n until the on-screen
/
⁄ ¤
next to the desired setting or the RETURN TO
MASTER MENU line and press the Set Button
p. If you have no other adjustments to make, press
the OSD Button v to exit the menu system.
Default Surround Mode
In normal operation, when the AVR 240 senses a
Dolby Digital or DTS digital audio data stream, it will
automatically switch to the appropriate default sur-
round mode, with the AVR responding to the data flags
that are encoded on the DVD disc or in the digital
video broadcast. In most cases, this is the correct
mode, but you may have a particular preference for
the mode you wish to hear when Dolby Digital or DTS
is present. As described on pages 35–36, you may
select from several available choices of Dolby or DTS
modes, depending on the number of channels you
have configured your AVR for and the format of the
incoming bitstream.
The AVR 240 allows you to set the unit so that it will
either respond to the default or switch to your desired
mode. If you wish to leave the default so that the sur-
round mode information as it is encoded in the disc is
always used, no further action is needed. Simply leave
the setting at the factory default of ON.
To set the unit so that it responds to the last surround
mode you selected when a Dolby Digital or DTS
source was playing, with the ADVANCED
SELECT menu on screen, press the
Buttons n so that the › cursor is pointing to
the DEFAULT SURR MODE line. Press the
Buttons o so that OFF appears. The unit
/
⁄ ¤
will now switch to the last selected mode instead of
the disc's default mode for Dolby and DTS digitally
encoded data streams.
This setting does not apply to standard PCM digital
inputs or to analog sources. In those cases, the unit
will always apply the surround or processing mode
that was last used for that input.
If you wish to make other adjustments, press the
Buttons n until the on-screen › cursor
/
⁄ ¤
is next to the desired setting or the BACK TO
MASTER MENU line and press the Set Button
p. If you have no other adjustments to make, press
the OSD Button v to exit the menu system.
40 ADVANCED FEATURES
Full-OSD Background Color
When the full-OSD menu system is in use, the default
display appears with a solid blue background with
white characters. If you wish, you may select a solid
›
cursor is
black background as the default. This setting may be
changed by pressing the OSD Button v to display
the MASTER MENU. Use the
n to scroll down to the ADVANCED line,
and press the Set Button p to select the
ADVANCED SELECT submenu. Press
Buttons n again to scroll to the
the /
⁄ ¤
OSD BACKGROUND line. When BLUE
appears, the full-OSD menus will appear on screen
with a solid blue background. Press the
Buttons o until BLACK appears to display the
full-OSD menus on a solid black background instead.
This setting will be retained even when the AVR 240
is turned off to the Standby mode.
If you wish to make other adjustments, press the
Buttons n until the on-screen › cursor
/
⁄ ¤
is next to the desired setting or the BACK TO
MASTER MENU line and press the Set Button
p. If you have no other adjustments to make, press
the OSD Button v to exit the menu system.
/
⁄ ¤
/ Buttons
⁄ ¤
/
⁄ ¤