Harman Kardon AVR 240 Owner's Manual page 14

REMOTE CONTROL FUNCTIONS
d Bridge
The Digital Media Player (DMP) Selector:
TM
When Harman Kardon's The Bridge (optional) is con-
TM
nected to The Bridge Digital Media Player (DMP)
TM
Connector e and a compatible Apple
The Bridge
docked in , pressing this selector will select
TM
the iPod as the audio source input device for the
AVR 240. In addition, if a video display is connected
to one of the Video Monitor Outputs cV, the
iPod's messages will appear on screen, and in the
Upper and Lower Display Lines PQ. The
/‹/› Buttons no, the Set Button
/
⁄ ¤
p and the Transport Controls ` may be used
to navigate the iPod and to operate many functions.
See page 37, and the manuals for The Bridge and
your iPod for more information.
e 6-Channel/8-Channel Direct Input: Press
this button to select the device connected to the
6/8-Channel Direct Inputs j. (See page 31 for
more information.) When the device connected to the
6/8-Channel Direct Input j is also a video source,
such as a DVD or DVD-Audio player with an onboard
audio decoder, you must first select that video source
by pressing one of the Input Selectors e, then
press this button to choose the device connected to
the 6/8-Channel Direct Input j as the audio
source. Note that if you desire, you may select any
video source to be used in conjunction with the 6/8-
Channel Direct Input j as the audio source.
f Mute: Press this button to momentarily silence
the AVR 240 or TV set being controlled, depending on
which device has been selected. When the AVR 240
remote is being programmed to operate another device,
this button is pressed with the Input Selector Button
e to begin the programming process. (See page
41 for more information on programming the remote.)
14 REMOTE CONTROL FUNCTIONS
® iPod ® is