4-stream digital media center with progressive-scan dvd-video playback and 250g internal hard drive, digital media center with progressive-scan dvd-video/audio playback, 7 x 85w 7.2-channel a/v receiver with hdmi switching/repeater and audio/video process (40 pages)
Page 1
Owner’s Manual. We strongly recommend that you read the Owner’s Manual for complete details on how to install, configure and operate the AVR 240, as well as for the important safety information it contains. Figure 1 – Speaker Placement The colors shown for each speaker correspond to the matching output terminal connection on the back of the AVR 240 (see page 8).
Page 2
FRONT RIGHT FRONT LEFT SPEAKER SPEAKER Step 2. Connect the speakers to the receiver: red (+) on speaker to colored (+) on receiver, and black (–) to black (–) (see page 15). Step 3. Connect the Subwoofer Pre-Out jack to the Line-In jack on your subwoofer (see page 15).
Page 3
However, either component video input may be reassigned using the Input Setup menu. Switch your TV set’s input to match the type of video used for the currently selected source. : Make sure the AVR 240 is turned off, then connect the Bridge optional to the DMP connector.
Page 4
Coax Device Connection Options : Recommended connections are shown in red, but connections may be made to best fit your system requirements. The Coaxial 3, Optical 3 and Video 4 inputs are on the front panel of the receiver. Device...