sunjoe MJ401E Operator's Manual page 7

Grass Bag Assembly + Fitting
1. Fit the support rod into the holes in the plastic cover.
The bend of the support rod should face the rear of the
machine (Fig. 4).
Fig. 4
Plastic
cover
Support rod
2. Place the protective plastic straps onto the support rod
(Fig. 5).
Fig. 5
Protective
plastic
straps
Support rod
3. Raise the spring loaded ejector flap and move the grass
bag up to the mower body. Fasten it onto the coupling
hooks (Fig. 6).
Fig. 6
Grass bag
4. Release the ejector flap to secure the grass bag in
position (Fig 7).
Fig. 7
Features
Safety lock button (A): Used to engage the switch.
Switch lever (B): Used to start and stop the mower.
Fig. 8
Switch lever (B)
Safety lock
button (A)
Grass bag (C): Used to collect mowed clippings.
Fig. 9
Ejector flap
7
Grass bag
Ejector flap
Grass bag (C)