BLUETOOTH®
BLUETOOTH — Connection
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
Connect the microphone
MIC (Microphone input terminal)
Rear panel
Pair and connect a Bluetooth device for the first time
1
Press
to turn on the unit.
2
Search and select this unit model name (DPX79
DPX50
BT) on the Bluetooth device.
*
"PAIRING" "PASS XXXXXX" Device name "PRESS" "VOLUME KNOB" scrolls on
the display.
• For some Bluetooth devices, you may need to enter the Personal Identification
Number (PIN) code immediately after searching.
3
Press the volume knob to start pairing.
"PAIRING OK" appears when pairing is completed.
JS_KWD_DPX792BH_KN_EN_00_1.indd 15
Supported Bluetooth codecs
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)
– aptX Codec (aptX) (for
Microphone
(supplied)
Secure using cord clamps
(not supplied) if necessary.
*
BH/ DPX70
• This unit supports Secure Simple Pairing (SSP).
• Up to 10 devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetooth device
/
Once pairing is completed, Bluetooth connection is
)
established automatically. "BT1" and/or "BT2" indicator
on the faceplate lights up.
• A maximum of two Bluetooth phones and one
• Some Bluetooth devices may not automatically
• Refer to the instruction manual of the Bluetooth
Adjust the microphone
angle
When you connect iPhone/ iPod touch/ Android
device to the USB input terminal, pairing request (via
Bluetooth) is automatically activated.
Press the volume knob to pair once you have
confirmed the device name.
Automatic pairing request is activated only if:
*
BH/ DPX59
*
BT/
– Bluetooth function of the connected device is turned
– [AUTO PAIRING] is set to [ON]. ( 19)
– KENWOOD MUSIC PLAY application is installed on the
will remain registered in the unit even if you reset the
unit. To delete the paired device,
Bluetooth audio device can be connected at any time.
connect to the unit after pairing. Connect the device
to the unit manually.
device for more information.
Auto Pairing
on.
Android device ( 7) and [BROWSE MODE] is selected
( 8).
19, [DEVICE DELETE].
15
ENGLISH
28/10/2015 5:24:16 PM