User name:
o
Password:
o
•
After logging in, use the "Settings" menu on the top bar and select the "Device Management"
•
In the application a panel opens for configuring the devices managed by the recording software iVMS-4200
•
In the upper left part click on the tab "Server" and select "DVR, IPC, Encoder" from the list
•
In the bottom right part you will now see the available cameras on the network ("Online Device") - see Fig. 6
•
Double click on the found camera to open setting basic network parameters of the camera according to the
configuration of your network environment, enter the password for the user "admin" set in the camera, and save
by pressing the "Confirm" button
•
Open a Web browser and enter the IP address of the camera
•
Enter the login data and click on the "Login" button
•
After the first login you will be prompted to download and install the WebComponents addition that provides
the stream display in browsers.
•
Save the file (typically WebComponents.exe), close the browser, run the downloaded installation file and follow
the on-screen instructions. After installation is complete, open the web browser again with the camera's IP
address and enter login information. Now you can view the live image from the camera.
Fig. 6: Software iVMS-4200 – searching for
camera in the network
Restoring the factory settings
•
Disconnect the camera from the power supply
•
Press and hold the "Reset" button which is located under the housing of the camera
•
Keep the button pressed and connect the camera to power supply
•
Hold the reset button for at least 10 seconds and then release it
•
After a while the camera will start with default parameter s
We hope that you will be satisfied with the product. For general questions please contact your direct vendor.
www.imago-video.com
4
admin
choose your own password when loging-in for the first time
IMAGO IVN-x2P3 NB 2.8 – Quick Installation Guide
October 2014
www.imago-video.com