Advertisement
Fig. 2: Camera IVN-x2P3 NB 2.8
Fig. 4 Dismantled cap of the RJ-45
connector
Fig. 5 Assembled cap of the RJ-45
connector
The first access to the camera
•
After connecting the camera to the power supply and the data network the camera can be accessed via a web
browser; the camera starts about 60 seconds.
•
The default setting of the camera:
IP address:
o
User name:
o
Password:
o
•
The camera can be found on the network using the application of the recording software iVMS-4200 on the
attached CD or can be downloaded at
•
Run the installation file from the CD (as a standard iVMS-4200.exe), accept the license agreement and follow the
instructions on the screen
•
After installation run the software iVMS-4200 Client and log in - default login data:
•
3
192.0.0.64 (DHCP Client not enabled)
admin
12345
www.imago-video.com
IMAGO IVN-x2P3 NB 2.8 – Quick Installation Guide
Fig.3: Camera interior with sensor module
lock
www.imago-video.com
Advertisement
