Axis M3011 Installation Manual
Hide thumbs
Also See for M3011:
- Installation manual (72 pages) ,
- User manual (46 pages) ,
- Datasheet (2 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Axis M3011
Summary of Contents for Axis M3011
- Page 1 INSTALLATION GUIDE www.axis-shop.ru AXIS M3011/M3014 Network Camera...
- Page 2 • Search by product, category, or phrases Australia - This electronic device meets the • report problems to Axis support by logging in to your requirements of the Radio communications private support area. (Electromagnetic Compatibility) Standard AS/NZS...
-
Page 3: Table Of Contents
Page 3 AXIS M3011/M3014 Network Camera This guide helps you install the AXIS M3011/M3014 Network Camera on your network. For more details about this product, see the AXIS M3011/M3014 Network Camera’s user manual, available from or in the Axis Network Video Product CD. -
Page 4: Hardware Overview
Page 4 AXIS M3011/M3014 Installation Guide Hardware overview ceiling springs metal camera module holder network connector in camera LED indicators control button magnetic dome cover plugs (2x) (maybe replaced by tamper-proof screws (2x)) -
Page 5: Install The Camera
8. Attach the cable to the network connector (supports PoE class 1) in the camera. If PoE is not supported by the network switch, use the supplied PoE midspan/power injector to connect power to the AXIS M3011/M3014 Network Camera. 9. Check that the indicator LEDs indicate the correct conditions. See the table on page 13 for further details. -
Page 6: Assign The Ip Address
IP address for access. Most networks today have a DHCP server that automatically assigns IP addresses to connected devices. If your network does not have a DHCP server, the AXIS M3011/ M3014 Network Camera will use 192.168.0.90 as the default IP address. - Page 7 AXIS IP Utility automatically discovers and displays Axis devices on your network. You can also manually set a static IP address through this application. AXIS IP Utility is available on the Axis Network Video Product CD, or it can be downloaded from Note that you must install the AXIS M3011/M3014 Network Camera on the same network segment (physical subnet) as the computer running AXIS IP Utility.
- Page 8 Automatic discovery 1. Check that the camera is connected to the network and that power has been applied. 2. Start AXIS Camera Management. In the window that appears double-click AXIS M3011/M3014 to open the camera’s home page. 3. See page 9 for instructions on how to set the password. Set the IP address in multiple devices.
-
Page 9: Set The Password
4. To log in, enter the user name “root” in the dialog as requested. (The default administrator user name root cannot be deleted.) 5. Enter the password as set above, and click OK. If the password is lost, the AXIS M3011/M3014 must be reset to the factory default settings. See page 13. -
Page 10: Lens Adjustments
Lens lock screw Focus The focus of the AXIS M3011/M3014 Network Camera is set at the factory from 0.5m to infinity. It does not normally need adjustment. To focus on objects closer than 0.5m, or if for some reason the lens has lost focus, this can be adjusted in the following way: 1. - Page 11 To view the admin pages for the network DHCP server, see the View DHCP server server’s own documentation. admin pages Note: • UPnP™, DHCP and Bonjour are enabled by default in the AXIS M3011/M3014 Network Camera.
- Page 12 1. Acquire an IP address on the same network segment your computer is connected to. 2. Locate the serial number (S/N) on the AXIS M3011/M3014 Network Camera product label. In Command Prompt enter the following commands (as appropriate for your operating system): Windows syntax arp -s <IP Address>...
-
Page 13: Led Indicators
For more information, please refer to the online help and the user’s manual. The AXIS M3011/M3014 Network Camera User’s Manual is available from the Axis Web site at or from the Axis Network Video Product CD.