Table of Contents
Advertisement
8.
Connect the internal power cable to the HDD.
Note: The internal power cable is connected to the Main board inside the DVR. The
power cable features two connectors, which can be used to connect to two HDDs.
9. Screw the HDD with brackets inside the DVR (You can screw up to 4 HDDs).
• If you only need to use one to three HDDs, just screw them on the HDD tray.
• If you need to use four HDDs, you have to screw one HDD under the HDD tray.
a. Unscrew eight screws on the HDD tray first and take the tray out.
HDD Tray
HDD Tray
10
PARAGON FHD 16x4
Advertisement
Table of Contents
