Party Externalmemory; Digital Disk Recorder (Sy-Fd20) - Technics SX-PR50V User Manual

PartV
External m emory
Digital D iskRecorder ( SY-FD20)
Data for up to 20 performances-including
all panel settings, button memories, COMPOSER and SE-
QUENCER contents-can be stored on one SY-D20 digital memory disk (floppy disk) using the Digital
Disk Recorder (included on the PR350; for the PR50V and PR250, the SY-FD20 is an option). The storable
internal memory is fixed at a limited capacity, but this external memory device expands the storable
memory infinitely. By recording performance data, one simple procedure lets you load the recorded settings
into the piano's memory at any time.
Internal memory
Sequencer data:
one song
SY-FD20
Digital Disk
Recorder (sold
separately on the
PR50V and PR250)
External memory
Save
(store the data from
the SEQUENCER to
the disk)
Sequencer data:
Max. 20 performances
[I]
Load
(recall the stored
data from the disk)
SY-D20
Memory Disk
Installing inyourDigital E nsemble
(PR50V/PR250)
1. Make sure that the power to the Digital En-
semble is turned off.
2. Remove the cover from the connector unit by
first removing the screw.
3. Use the gap at the top of the cover as a finger-
hold to apply downward pressure.
4. Pull the cover out horizontally and remove it
from the instrument.
5. Insert the Digital Disk Recorder and push it in
firmly and completely.
6. Secure the Digital Disk Recorder to the instru-
ment with the screw you removed in step 2.
Note: To affix the Digital Disk Recorder, the
same screw which was used to affix the cover
must be used. Use of a different screw may
result in malfunction of or damage to the Digital
Disk Recorder.
r.: I I L --1
- '\ 1\
...
31