Playback Thestoredpattern; Editing A Presetrhythmpattern - Technics SX-PR50V User Manual

Part
IV Creating rhythmpatterns
IV.Finish storingtherhythm
When all the parts to the pattern have been stored
as desired, press the COMPOSER REC button
once again to turn it off and complete the storage
operation.
OC~~~EC
oC°'k~SER
oc~m5JR
o~o
Playback thestoredpattern
1. In the RHYTHM SELECT section, press the
COMPOSER button to turn it on. Then press
the buttonfor the rhythmpattern youwould like
~
to have played back.
RHYTHM SELECT
OMARQlOCQJl1ll<OWAlrz O SWII<GIOSWII<G200lXlE o ~.ih OLAnN' OLAnN20~' 00
08 BEAT o~... OSI<JfILf O ~UD O~BEA!IOUAT2 ol;',g o~~NG OO<SCIJo~~ :::;':.7':;'
y-QIY Q Q Q Q y.Q QI~!£C:
0
.
The indicator above the selected button will
light.
2. Press the START/STOP button.
. The DRUMS part of the recorded rhythm
begins to play.
. The BASS and ACCOMP parts are played
back with the AUTO PLAY CHORD.
0 /
-AUTO PLAY CHORD-
BASIC SPLIT ADVANCEDSPLIT PIANIST
0 0 0
000
START!
STOP
. The ACCOMP PART 1-3 buttons should be
on.
Editing a presetrhythmpattern
The editing feature of the COMPOSER allows you
to modify any of the factory-preset rhythms or
even your original rhythms, and then store the
new pattern in a COMPOSER number button.
1. Select a preset rhythm or a COMPOSER num-
ber button.
2. Press the COMPOSER REC button to turn it
on.
3. Press a number button in the RHYTHM
SELECT section to specify the memory in
which you wish to store the pattern.
4. Turn on the button for the part you wish to
modify.
5. Edit the pattern which is played back.
6. Repeat steps 4 and 5 for the other parts, if
desired.
7. After editing, turn off the COMPOSER REC
button.
30