ausdom AD282 Instruction Manual page 11

When the car is detected vibration and collision, the built-in G-Sensor
feature will automatically enter the emergency recording mode to lock
the recorded images. A lock sign will appear on the right top corner of
the screen. Real-time locked files will not be overwritten by Loop
Recording. This item allows you to adjust the sensitivity of the
G-Sensor.
Values: Off/High/Medium/Low
Note: The default value of G-Sensor is Medium.
WB
The White Balance feature can boil down to the concept of color
temperature. Color temperature is a way of measuring the quality of a
light source. Adjust the white balance to get the colors in your images
as accurate as possible.
Values: Auto/Incandescent/Sunny/Cloudy/Fluorescent
EV bias
- 2 . 0 E V , - 1 . 7 E V , - 1 . 3 E V , - 1 . 0 E V , - 0 . 7 E V , -
0.3EV,0.0EV(default),+0.3EV,+0.7EV,+1.0EV,+1.3EV,+1.7EV,+2.0EV
Language
Value:English/Russian
Time Setup
Set the current date and time. Use the buttons to switch
Y/M/D/H/M and click button to confirm/save the settings.
Beep Sound Setting
You can enable or disable the sound of the buttons located on the unit .
Values: On/Off
Auto Power Off Setting
You can set the Auto Power Off time from 4 options: Off/1 minute/3
minutes/5 minutes, . The DVR will automatically power off since the time
EN10