ausdom AD282 Instruction Manual page 10

video recordings. For instance, if you choose "3 minutes" as loop recording
time, the video recording will be saved onto a micro SD card as a 3
minutes' video. When the storage of memory card is full, the oldest files will
be overwritten automatically. Conversely, if this feature is disabled, it will
stop recording when the memory card is full.
Values: 1 Minute/3 Minutes/5 Minutes/Off
Park Mode
When your car is parked , any shaking or hit on the car will trigger the unit
to power on and record automatically , the video recordings will be locked
and saved to the event folder set in the DVR Camcorder and won't be
overwritten. Then The unit will automatically power off .
Values: Off/On
Image Quality
There are three quality values for the image quality. The value (ex. S. Fine)
used less compression and has the highest quality.
Values: S. Fine/Fine/Normal
Mic Setup
Enable or disable microphone during video recording.
Values: Off/On
Stamp Setting
If you tickle Date, Time, Driver ID, those information will be recorded and
displayed at the right bottom corner of videos as settings in Time, Date and
Driver ID accordingly.
Values: Date/Time/Drive ID
Driver ID Setting
You can set those boxes with car plate number or driver name. Once
you complete this setting, the car plate number or driver ID will be
displayed on the video recordings.
G-Sensor Setting
EN 9