Yamaha MT09 Owner's Manual page 26

Instrument and control functions
Multi-function display
1
1
2
3
4
5
1. Multi-function display
6
The multi-function display is equipped
with the following:

an odometer
7

two tripmeters (which show the
distance traveled since they were
8
last reset)

a fuel reserve tripmeter (which
9 shows the distance traveled since
the last segment of the fuel meter
started flashing)
10

an instantaneous fuel consump-
tion display
11

an average fuel consumption dis-
play

a coolant temperature display
12

an air intake temperature display

self-diagnosis mode (MT09)

a brightness control display
TIP

The odometer will lock at 999999
and cannot be reset.

The tripmeters will lock at 9999.9
but can be manually reset.
Push the "SELECT" button to switch
the display between the instantaneous
fuel consumption mode "km/L" or "L/
100 km", average fuel consumption
mode "AVE_ _._ km/L" or "AVE_ _._ L/
100 km", coolant temperature mode
"C", air intake temperature mode "Air_
_ C", odometer mode "ODO", and trip-
meter modes "TRIP 1" and "TRIP 2" in
the following order:
km/L or L/100 km  AVE_ _._ km/L or
AVE_ _._ L/100 km  C  Air_ _ C
 ODO  TRIP 1  TRIP 2
For the UK:
Push the "SELECT" button to switch
the display between the instantaneous
fuel consumption mode "km/L", "L/100
km" or "MPG", average fuel consump-
tion mode "AVE_ _._ km/L", "AVE_ _._
3-11
L/100 km" or "AVE_ _._ MPG", coolant
temperature mode "C", air intake tem-
perature mode "Air_ _ C", odometer
mode "ODO", and tripmeter modes
"TRIP 1" and "TRIP 2" in the following
order:
km/L, L/100 km or MPG  AVE_ _._
km/L, AVE_ _._ L/100 km or AVE_ _._
MPG  C  Air_ _ C  ODO 
TRIP 1  TRIP 2
TIP

Push the "RESET" button to switch
the display in the reverse order.

The fuel reserve tripmeter and
self-diagnosis modes come on au-
tomatically.
If the last segment of the fuel meter
starts flashing (" " will also flash for
MT09), the display automatically
changes to the fuel reserve tripmeter
mode "F-TRIP" and starts counting the
distance traveled from that point. In this
case, push the "SELECT" button to
switch the display in the following order:
F-TRIP  km/L or L/100 km  AVE_
_._ km/L or AVE_ _._ L/100 km  C