Tachometer; Multi-Function Display - Yamaha YZF-R6 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Tachometer

3
1. Tachometer
2. Tachometer red zone
The electric tachometer allows the rider
to monitor the engine speed and keep it
within the ideal power range.
When the key is turned to "ON", the ta-
chometer needle will sweep once
across the r/min range and then return
to zero r/min in order to test the electri-
cal circuit.
CAUTION:
Do not operate the engine in the ta-
chometer red zone.
Red zone: 15500 r/min and above
EAU11872

Multi-function display

1. Multi-function display
2. "SELECT" button
3. "RESET" button
The multi-function display is equipped
with the following:
G
a speedometer (which shows the
riding speed)
G
an odometer (which shows the to-
tal distance traveled)
G two tripmeters (which show the
distance traveled since they were
ECA10031
last set to zero)
G
a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
G a clock
G
EAU12311
G
NOTE:
G
G
Odometer and tripmeter modes
Pushing the "SELECT" button switches
the display between the odometer
mode "ODO" and the tripmeter modes
"TRIP 1" and "TRIP 2" in the following
order:
ODO → TRIP 1 → TRIP 2 → ODO
If the fuel level warning light comes on
(see page 3-3), the odometer display
will automatically change to the fuel re-
serve tripmeter mode "F-TRIP" and
start counting the distance traveled
from that point. In that case, pushing
3-8
a self-diagnosis device
a display brightness and shift tim-
ing indicator light control mode
Be sure to turn the key to "ON" be-
fore using the "SELECT" and "RE-
SET" buttons.
For the U.K. only: To switch the
speedometer and odometer/trip-
meter displays between kilometers
and miles, press the "SELECT"
button and "RESET" button to-
gether for at least two seconds.