Replacing The Fuse - Yamaha TT-R50E Owner's Manual

Periodic maintenance and adjustment

Replacing the fuse

The fuse is located inside the battery
coupler.
1
2
3
1. Battery coupler
2. Spare fuse
3. Fuse
If the fuse is blown, replace it as fol-
lows.
1. Turn the key to "OFF" and turn off
all electrical circuits.
2. Remove the seat. (See page 4-9.)
3. Remove the battery cover by re-
moving the bolts.
1. Bolt
2. Battery
3. Battery cover
4. Disconnect the battery coupler.
EAU42025
1
1. Battery coupler
5. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
Specified fuse:
10.0 A
6. Connect the battery coupler.
7. Install the battery cover by install-
ing the bolts.
8. Install the seat.
9. Turn the key to "ON".
10. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
7-28
[EWA15132]
7