Location And Function Of Controls - Sony STWA-C101 Operating Instructions Manual

Location and Function of Controls

Front/Side panel
a Reset button
Press and hold the button for about five
seconds with a thin, straight object (such
as an opened paper clip) to restore the
unit to the factory default settings,
including the IP address.
b
(LAN) connector
Connect to the LAN connector (RJ-45)
on the hub or router of your network,
using a LAN cable (category 5 straight
type) (not supplied).
c Digital audio connector
Format: AES/EBU
Connector type: RJ-45
Cable type: LAN cable (category 5
straight type, shielded) (not supplied)
Pin Function
No.
1 NC
3 NC
5 NC
7 AES/EBU (+)
10
GB
Pin Function
No.
2 NC
4 NC
6 NC
8 AES/EBU (–)
CAUTION
• For safety, do not connect the connector
for peripheral device wiring that might
have excessive voltage to the following
ports.
: LAN connector
: Digital audio connector
Follow the instructions for the above ports.
• When you connect the digital audio cable
of the unit to peripheral device, use a
shielded-type cable to prevent malfunction
due to radiation noise.
ATTENTION
• Par mesure de sécurité, ne raccordez pas le
connecteur pour le câblage de
périphériques pouvant avoir une tension
excessive aux ports suivants.
: Connecteur LAN
: Connecteur audio numérique
Suivez les instructions pour les ports ci-
dessus.
• Lors de la connexion du câble audio
numérique de l'appareil au périphérique,
utilisez un câble blindé afin d'empêcher
tout dysfonctionnement dû au bruit de
rayonnement.