Yamaha YZF-R6 Owner's Manual page 26

INSTRUMENT AND CONTROL FUNCTIONS
Display brightness and shift timing
indicator light control mode
km/h
3
2
1. Shift timing indicator light activation range
2. Brightness adjustable displays
3. Brightness level
4. Shift timing indicator light
This mode cycles through five control
functions, allowing you to make the fol-
lowing settings in the order listed be-
low.
G
Display brightness:
This function allows you to adjust
the brightness of the displays and
tachometer to suit the outside
lighting conditions.
G
Shift timing indicator light activity:
This function allows you to choose
whether or not the indicator light
should be activated and whether it
1
should flash or stay on when acti-
2
vated.
3
G
Shift timing indicator light activa-
tion:
4
This function allows you to select
the engine speed at which the indi-
cator light will be activated.
G
Shift timing indicator light deactiva-
tion:
This function allows you to select
the engine speed at which the indi-
cator light will be deactivated.
G Shift timing indicator light bright-
ness:
This function allows you to adjust
the brightness of the indicator light
to suit your preference.
TIP
In this mode, the right display shows
the current setting for each function
(except the shift timing indicator light
activity function).
To adjust the brightness of the multi-
function meter displays and tachometer
1. Turn the key to "OFF".
2. Push and hold the "SELECT" but-
3. Turn the key to "ON", and then re-
4. Push the "RESET" button to select
5. Push the "SELECT" button to con-
To set the shift timing indicator light ac-
tivity function
1. Push the "RESET" button to select
3-12
ton.
lease the "SELECT" button after
five seconds.
the desired brightness level.
firm the selected brightness level.
The control mode changes to the
shift timing indicator light activity
function.
one of the following indicator light
activity settings:
G The indicator light will stay on
when activated. (This setting
is selected when the indicator
light stays on.)