Before First Use; Assembly And Use Of The Pitcher - Ninja STORM QB751Q Series Owner's Manual

Before First Use

WARNING: 40 oz.
4-Blade Assembly is
sharp and not locked in
place. If using the pour
spout, ensure that the
splashguard is fully on
the pitcher. Failure to
do so will result in a
risk of laceration.
PLEASE KEEP THESE IMPORTANT SAFEGUARDS
IN MIND WHEN USING THE APPLIANCE:
IMPORTANT: Make sure that the Master Pod is
plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the 40 oz. 4-Blade
Assembly in first.
IMPORTANT: Attachments are not interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the splashguard on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it may
result in damage to the accessories.
CAUTION: Do not immerse the Master Pod
into water or any other liquid.
1
Remove all packaging material and labels from the appliance.
Separate/remove all parts from each other.
2
Wash the lid, splashguard, pitcher, and 40 oz. 4-Blade
Assembly in warm, soapy water. When washing the
blade assembly, use a dish-washing utensil with a
handle to avoid direct hand contact with blades.
WARNING: Handle the 40 oz. 4-Blade Assembly
with care when washing, as the blades are
sharp.
3 Handle the 40 oz. 4-Blade Assembly with care to avoid
contact with sharp edges. Rinse and air dry thoroughly.
4 The pitcher, lid, splashguard, and 40 oz. 4-Blade
Assembly are all dishwasher safe. It is recommended
that the lid, spashguard and blade assembly be placed
on the top rack. Ensure that the blade assembly
is removed from the pitcher before placing in the
dishwasher.
5
Wipe the motor base clean with a damp cloth.
7 1-877-646-5288

Assembly and Use of the Pitcher

CAUTION: If
pouring with the
lid or splashguard
removed, ALWAYS
remove the 40 oz.
4-Blade Assembly
first. Failure to do
so will result in a
risk of laceration.
c
Shaft
a
Fig. 1
1
Review warning and caution statements at the top of
page 8 before proceeding to number 2.
2
Place the pitcher on a clean, dry, level surface.
3 Add the ingredients to be processed into the pitcher.
4 Holding the 40 oz. 4-Blade Assembly by the shaft,
place it onto the spindle pin inside the pitcher.
(Fig. 1, a)
WARNING: Place 40 oz. 4-Blade Assembly inside
the pitcher carefully as blades are sharp.
WARNING: DO NOT try to place the 40 oz. 4-Blade
Assembly onto the Master Pod and then into the
pitcher. (Fig. 1, b)
IMPORTANT: Never add ingredients into the pitcher
before placing the blades in first.
5
Place the pitcher splashguard onto the top of the
pitcher. (Fig. 1, c)
b