Page 2
SHOCK OR INJURY: FOLLOWING: WARNING: Remove utensils prior to processing. Failure to remove may READ ALL INSTRUCTIONS BEFORE cause the jar to be damaged or to USING YOUR NINJA MASTER PREP ® ® shatter which may cause personal PROFESSIONAL. injury.
Page 3
6 To protect against electrical shock, DO NOT 18 DO NOT use the appliance if blade submerge the appliance or allow the power assemblies are bent or damaged. cord to come into contact with water or any 19 DO NOT expose pitcher or the chopping other liquid.
Page 4
THIS BOOK COVERS MODEL NUMBERS: QB1007QBK QB1007QBL QB1007QCN QB1007QPR TECHNICAL SPECIFICATIONS Voltage: 120V., 60Hz. Power: 450 Watts Pitcher Capacity: 48 oz. (6 cups, 1.5 L) 40 oz. (5 cups, 1.25 L) Bowl Capacity: 16 oz. (2 cups, 500 ml) TOLL FREE: 1-877-646-5288...
Contents Thank you for Getting Started ..................... 5 purchasing Before First Use ....................7 the Ninja ® Assembly and Use of the Pitchers ................8 Master Prep ® Assembly and Use of the Master Prep Bowl ............10 Professional. Cleaning and Maintenance .................. 12 Troubleshooting Guide ..................
Master Prep Professional Bowl with Non-Slip Base ® b Master Prep j Bowl Splashguard Professional 40 oz. Pitcher with Non-Slip Base c Ninja k Upper Chopping Blade Assembly (bowl) 4-Blade Assembly ® d 40 oz. Pitcher Storage Lid l Lower Chopping Blade Assembly (bowl) ®...
Page 7
The Ninja Master Prep Professional is an indispensable kitchen tool that is perfect for blending, chopping, mixing or ® ® pureeing when preparing your favorite recipes. For best results, be sure to carefully read all the instructions contained in the manual before using this appliance.
Before First Use WARNING: The Blade Assemblies WARNING: Blade are sharp and not locked in place. Assemblies are sharp If using the pour spout on the and not locked in place. Make sure to carefully pitcher splashguard, ensure the remove splashguard and splashguard is fully secured to the Blade Assembly, holding pitcher before pouring.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or to shatter, which may cause personal injury. WARNING: DO NOT try to place the Ninja 4-Blade or 6-Blade Assemblies onto the Master Pod and then into the pitcher.
Page 10
NOTE: DO NOT operate the appliance continuously for the Ninja Master Prep Professional pitcher. more than 15 seconds at a time. HINTS & TIPS FOR USING YOUR NINJA To stop the appliance, remove your fingers from the On/ MASTER PREP PROFESSIONAL Off pulse button.
Assembly and Use of the Master Prep Bowl ® WARNING: Handle the Upper and Lower Chopping Blade Assemblies with care, as the blades are sharp. WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to shatter, which may cause personal injury.
Page 12
Place the Master Pod on top of the splashguard making Bowl. sure that it is securely in place. (fig. 4) DO NOT HINTS & TIPS FOR USING YOUR NINJA ® attempt to operate the appliance without the safety MASTER PREP PROFESSIONAL splashguard in place.
WARNING: Handle the Blade Assemblies with care when washing, as the blades are sharp. Contact RESETTING THE MOTOR THERMOSTAT with the blades’ edges can result in laceration. The Ninja Master Prep Professional features a unique ® Separate/remove all parts from each other.
Troubleshooting Guide PROBLEMS POSSIBLE REASONS & SOLUTIONS Check that the bottom of Master Pod is clean and there is no food blocking connection when placing on containers. There is too much food in the container. The unit has overheated or overloaded. Unplug and wait approximately 10 Motor Doesn’t Start or Blade minutes before using again.
(as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. Product Registration Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja product within ten (10) days of ®...