Table of Contents
Advertisement
Auxiliary rule reports
After an auxiliary rule has been broken by a vehicle or driver, it will be available in your
exception reports.
1. Select Rules & Groups from the left hand side menu, then select Exceptions from the
sub-menu.
2. Select which Device, Driver or Group to report on and select the appropriate time and
date range from the Filter.
3. Select the Options button, the Select Exception Rules window is now displayed.
4. From the Select All Rules drop down menu, select Select Particular Rules.
5. Select the auxiliary rules to report on and close the Select Exception Rules window.
6. Select Apply to run your report using the filter you created
Note: To view a summarized version which includes duration totals and the total number of
incidents select the Summarized button from the top menu.
Auxiliary rule notifications
When auxiliary rules are broken you can have automatic notifications sent out to inform
fleet managers. A notification can be displayed in the following ways:
● Email to one or more people
● An alert displayed on Geotab
● The driver can be alerted by an audible in vehicle alarm
● Third-party systems can use additional means such as SMS
60
Advertisement
Table of Contents
