Switching The Scale Off; Saving A Measurement - Kompernass KH809 Operating Instructions Manual

GB
Switching the scale off

Saving a measurement

10
4) To recall the nutritive and energy values, press the desired func-
tion button 8. The required detail appears in the display 3.
If no further buttons are pressed, after approx. 8 seconds the display
changes back to the weighing mode and the weight is indicated. If you
wish to switch straight into the weighing mode, press the button
The appliance indicates the weight.
NOTICE
► Should you press a function button
code has not yet been entered, „Code" blinks in the display 3 3 times. In
this case, enter in the desired code.
NOTICE
► Due to natural fl uctuations in the energy and nutritional values, only
approximate are possible.
To switch the scales off , press the button ON/OFF TARE
The scales switches itself off .
or
Wait for about 60 seconds after the last usage. The scales switches itself off
automatically.
You can save all indicated values of a foodstuff . The scales automatically adds
together the values each saved measurement. . Thus, for example, you can save
your entire food values eaten in one day and recall them at the end of the day.
The saved values are retained, even when you switch the scales off or change the
batteries.
You have previously made a measurement and entered the code.
1) Press the save button M+
pears "M", the save location (e.g. 01) and the weight. M01 (or the last occupied
space) is shown permanently on the display 3.
NOTICE
save button M+ 4 without having previously entered in a
► If you press the
code, "Code" blinks 3 times in the display 3. Then enter in the required
code.
8 (except
4 to save the measurement. In the display 3 ap-
Nutrition Scales KH 809
Operation
, ), although a
for about 3 seconds.
.